SunGold Power 10kW 24V Split Phase Solar Inverter

SunGold Power 10kW 24V Split Phase Solar Inverter

Description:

Sungoldpower 10000W 24V inverter is built for the purpose of running the whole house(small home), business office or large RV, which is perfect for using with renewable solar and using as an off-grid home and business back up power supply. The split-phase inverter require 240VAC input and provide 110/120VAC OR 220/230/240VAC output power for all kinds of appliances.

• Continuous Output Power :10.0KW
  
• Surge Rating(20s) :30.0KW
  
• Output Waveform :Pure Sine Wave
  
• AC Output Voltage: 120V and 240V
  
• AC Input Voltage:240V
  

• DC Battery Voltage:24Vdc
  
• Solar charger Current:60Amp
  
• AC Battery charger:120±5Amp
  
• Output Frequency :50Hz /60Hz
  
• Typical transfer Time :10ms(Max)
  

RELIABLE POWER SOLUTION

APPLICATION OF POWER INVERTER

The pure sine wave inverter can protect your electronic devices and provide reliable power. Pure sine wave help electronics less wear, kept sensitive electronics running smoothly to avoid the modified sine wave inverters which tend to damage electronics. The inverter can meet the power requirements of the appliances. In addition, the inverter/charger regulates the battery charging from other sources such as solar, wind or backup generators.

This power inverter has the direct-connect terminal block, which allows users to surpass the 10,000 watt capacity and harness its 300% surge power (up to 300,000 watts for 20 seconds as previously noted).
It can effective power your electronic devices, household appliance and power tools, especially the tools and appliances with startup surges, such as refrigerator, freezer, microwave.

This full sine wave power inverter was designed with top quality and durability in mind and is built to survive 10+ years in the harshest conditions. Our full sine wave 10KW inverter works with very little power loss, outputs an average THD of 3%. Its built-in battery charger can use AC power from the grid or from a generator, to recharge different kinds of battery bank.

The AC/battery priority switch is SW5. In AC priority mode, when utility AC power cuts off, the transfer relay is de-energized and the load is automatically transferred to the inverter output. Once the AC utility is restored, the relay is energized and the load is automatically transferred to AC utility. For solar systems, it is better to choose battery priority.

The Low Frequency Off Grid Solar Inverter is a multi-function inverter, combining functions of inverter, solar charger controller and battery charger to offer uninterruptible power support. The solar controller is Max 60A and 145V Input. You can disable the inbuilt solar controller, and connect to a larger external solar controller, or use for other systems (it is not limited for solar system).

The 10000w 24v inverter charger is a reliable power source for continuous backup applications. In inverter mode, DC power from the battery can be converted to AC power to power home appliances when a blackout in utility grid or when driving in mobile applications. It can also be a battery charger, which can convert the input AC power into DC power to charge the battery.

It is also perfect for off grid system or use AC power supply for home power emergencies, which can keep the power supply uninterrupted in the event of an power failure. It can detect the loss of power and switch over to get power form a connected battery bank seamlessly to keep the power supply constant.

During the emergency situations, the inverter can become a true UPS (Uninterruptable Power Supply) with its seamless transition transfer switch (batteries required). It can convert DC to AC power cleanly and efficiently. It can also automatically charge a battery bank when the city or generator power is available. The switch goes back and forth between city/generator power and inverter power automatically. 

Another popular application of this inverter is for RV and vehicle upfitting applications, such as powering lights and other appliances in an off-grid cabin. It also can provide electricity for a mobile business or mobile office, and running camping equipment. it is the best choice for your big power system.

Product Specifications

SunGold Power 10kW 24V Split Phase Solar Inverter Product Specifications

Main Features:

• 10KW split phase pure sine inverter charger DC 24V AC 240V input AC output 120V/240V
• Auto Generator Start (AGS)
• Support Solar Panel with MPPT Function
• Include Battery Temperature Sensor (BTS) and Remote Control
• 8 kinds of battery voltage selection ( lithium LiFePO4, gel, AGM and lead Acid batteries）
• Compatible With All kind of Home & Office Appliances
• Powerful Charge Rate Up to 120Amp, Selectable From 0%-100%
• Built-in transfer switch and battery charge, backup or off grid power solutions
• AC/Battery Priority Mode, Designates the Inverter-Preferred UPS Configuration
• 4-step Intelligent Battery Charging, PFC (Power Factor Correction) for Charger
• 8 ms Typical Transfer Time Between Utility & Battery,Ensure Power Continuity
• 15s Delay Before Transfer when AC Recover, Protection for Load when Used with Generator

Main Specification：

• Continuous Output Power :10.0KW
• Surge Rating(20s): 30.0KW
• Output Waveform: Pure Sine Wave
• AC Output Voltage: 120V and 240V
• AC Input Voltage: 240V ( not suitable for AC 120V input )
• DC Battery Voltage: 24Vdc
• Solar charger Current: 60Amp
• AC Battery charger: 120±5Amp
• Output Frequency: 50Hz /60Hz
• Typical transfer Time: 10ms(Max)

DC Input:

• Nominal Input Voltage :24.0Vdc
• Minimum Start Voltage :20.0Vdc / 21.0Vdc
• Low Battery Alarm :21.0Vdc / 22.0Vdc
• Low Battery Trip :20.0Vdc / 21.0Vdc
• High Voltage Alarm :32.0Vdc
• Low Battery voltage recover :31.0Vdc
• Power Saver on Idle Consumption: 35W
• Power Saver off Idle Power:150W

Charger :

• Output Voltage: Depends on battery type
• Battery Initial Voltage for Start Up: 20-31.4V
• Over Charge Protection Shutdown :31.4V
• Charger Breaker: 80A
• Input Voltage Waveform :Sine wave (Grid or Generator)
• AC input range:184-253Vac/140-270Vac
• Nominal Input Frequency :50Hz or 60Hz (Auto detect)

Solar Charger controller: (you can disable our solar controller, and connect with external solar controller）

• Solar Input Voltage Range: 30-145Vdc
• Max.PV Open Circuit Array Voltage: 145Vdc
• Rated Charge Current: 60A
• Over Charge Disconnection: 29.6V
• Over Charge Recovery :27.2V
• Over Discharge Disconnection:21.6V
• Over Discharge Reconnection :24.6V

Packaging:

• 10000W 24V Split Phase Pure Sine Wave Solar Power Inverter
• English Manual
• Remote Control
• BTS Cable
• Unit Weight: 149 LB
• Unit Size: 27.6 x 16.5 x 8inch
• Shipping Weight: 183LB
• Shipping Size: 33 x 21.3 x 16inch

Product Manual

SunGold Power 10kW 24V Split Phase Solar Inverter Product Manual

Download LF-PV Series Pure Sine Wave Inverter User's Manual

Product Warranty & Return

SunGold Power Warranty & Return

WARRANTY PERIOD

The warranty period for is 12/36 months for different Sungoldpower products. In each case, the warranty period is measured starting on the day of purchase by the original consumer purchaser. The sales receipt from the first consumer purchase, or other reasonable documentary proof, is required in order to establish the start date of the warranty period.

Our products come with 30 days return policy. Within the return period, Sungoldpower will pay the shipping costs of the returned item(s) for the following reasons: carrier damage, defective product, product inconsistent with advertisements, incorrect product received, or for any extra product you did not order. For all other reasons, customers are responsible for shipping fees.

LIMITED TO ORIGINAL CONSUMER BUYER

The warranty on Sungoldpower's product is limited to the original consumer purchaser and is not transferable to any subsequent owner.

EXCLUSIONS

Sungoldpower's warranty does not apply to:

Misused, abused, modified, damaged by accident, or used for anything other than normal consumer use as authorized in Sungoldpower's current product literature.

Attempted repair by anyone other than an authorized facility.

If any modified products received will be returned to you at your expense.

REPLACEMENTS

Sungoldpower will replace any Sungoldpower product that fails to operate( within 30 days). A replacement product assumes the remaining warranty of the original product.

If you want to replace one of the damaged parts, please contact us to arrange to send the replacement part. (under warranty)

RETURN

Sungoldpower offers a 30-day money back guarantee for goods purchased directly from Sungoldpower.com.We are confident that you will love your new Sungoldpower product. However. If for any reason you are not fully satisfied with your purchase, you may return your products within 30 days as long as they are new, undamaged, and unmodified. We cannot guarantee that your item will be accepted for a refund or exchange if it does not meet these requirements. If you are unsatisfied for any reason, simply let us know within 30 days. To be eligible for a return, your item must be unused and in the same condition that you received it. It must also be in the original packaging. Once we receive the product and confirm the validity, we will refund the full purchase price. Return requests outside of 30 days require special authorization.

Before returnning, please send an email to sales@sungoldpower.com to contact our Customer Service Team.

PLEASE BE PREPARED FOR THE FOLLOWING INFORMATION:

Order number

Video or photo of the faulty product (if applicable)

The item with the original packaging.

REFUNDS (IF APPLICABLE)

Once your return is received and inspected, we will send you an email to notify you that we have received your returned item. We will also notify you of the approval or rejection of your refund.

If you are approved, then your refund will be processed, and a credit will automatically be applied to your credit card or original method of payment, within a certain amount of days.

If you have any further questions, please send an e-mail to sales@sungoldpower.com 

Product FAQs

SunGold Power 10kW 24V Split Phase Solar Inverter FAQs

1. How do you connect this to a home with the multiple phase system?
It only has dual phase output, 120V and 240V, it can't work with the multiple phase system, thanks.

2. What is power consumption of the inverter with no load?
The power saver on idle consumption is 35W and power saver off idle power is 150W, thanks.